Pneumatic Punch Marker
The Pneumatic Punch Marker provides impact impressions on the surface of mild steel, stainless steel, or aluminum. The punch operates by extending with air pressure and retracting with a spring. It is best for material 1/4" or thicker, and is ideal for marking layout lines or hole locations.
Specifications
Two modes of operation are normally associated with the Pneumatic Punch Marker:
Center punch for drilled hole location - Using the machine control, the punch is properly positioned using offset commands. The depth of the punch can be controlled using the dwell command for a punch up to .01".
Scribe lines for secondary operations - Marks for weldments, bend lines, or assembly locations can be created using a high frequency function for the reciprocating pin (9000BPM). The Marker moves along a pre-programmed path, and depending on speed chosen, will create a line or a series of dots.
The Pneumatic Punch Marker is available on the EdgeMate, EdgeMaster, MPC2000, Titan II, and TMC4500ST machine models.