Products

The Triple Torch Oxyfuel Straight Line Bevel Unit provides weld preparation edges and plate squaring in a single pass. Cutting a “V”, “Y” or “K” cross section in one pass, the manually adjusted Triple Torch Oxyfuel Unit is designed to make a bevel cut in the longitudinal (X) axis.

It can also be used to bevel cut the ends of the plate (+/- Y) by rotating the unit +/-) 90°. The unit is counter balanced by a caster wheel. Single, double, and triple portal flame planers are used with the beveler, allowing for a variety of bevel angles and weldment edges to be cut. Available on the TMC4500 and the Titan II.

Features and Benefits:

• Provides plate squaring and weld preparation edges
  
• Torches may be adjusted from .375” to several inches apart using rackable dovetail horizontal slides providing for a wide range of bevel angles that can be cut on a variety of material thicknesses
  
• Cylinder lock to maintain proper height near the edges of the plate allows for cut completion without caster engagement
  
• Option - System for longitudinal axis operation only also available
  
• Capable of beveling in the X and Y axis by manually rotating the unit